Maelezo

Vipengele：

Mfano Na: TA65

Jina la Bidhaa: 50W 60W 72W open frame switching power supply Factory

* Ubunifu wa sura ndogo sana, rahisi kufunga.

* Uendeshaji kamili wa mzigo, kupanda kwa joto la chini

* Refer to safety requirements, isolation withstand voltage is greater than 1500VAC.

* Refer to EMC design, inaweza kuthibitishwa, usindikaji mdogo wa ripple.

* Teknolojia ya hiari ya urekebishaji wa ulandanishi, ufanisi wa juu na kupanda kwa joto la chini.

* Output short-circuit, over-current, over-power protection functions are perfect.

Maoni:

Kuzingatia kuzalisha bidhaa zifuatazo:

open frame switching power supply

Vigezo/Vigezo vya Umeme
Mfano Na		TA65-5V10A	TA65-12V5A	TA65-24V3A	TA65-36V2A
Pato	DC voltage	5V	12V	24V	36V
	Iliyokadiriwa sasa	10A	5A	3A	2A
	Masafa ya sasa	0-10A	0-5A	0-3A	0-2A
	rated power	50W	60W	72W	72W
	Ripple na Kelele (Upeo wa juu)	50mVp-p	100mVp-p	120mVp-p	150mVp-p
	Usahihi wa voltage	±5%	±3%	±3%	±3%
	Kiwango cha marekebisho ya mstari	±0.5%	±0.5%	±0.5%	±0.5%
	Udhibiti wa Mzigo	±1%	±1%	±1%	±1%
	Ufanisi (TYP)	88%	85%	88%	89%
	Aina ya marekebisho ya voltage	haiwezi kurekebishwa
	Kuanzisha, wakati wa kupanda	1500ms,30ms/220VAC 2500ms,30ms/110VAC(mzigo kamili)
Ingizo	safu ya voltage	VAC100-240V(85-264V) VDC127~370V (Tafadhali rejea “Kupunguza Mviringo”)
	Masafa ya Marudio	50/60Hz
	AC ya sasa (TYP)	0.6A/220VAC,1.2A/100V		0.65A/220VAC,1.25A/100V
	Inrush sasa (TYP)	COLD START 45A
	kuvuja kwa sasa	<2mA/240VAC
Ya sasa Ulinzi	mzunguko mfupi	Hali ya ulinzi: hali ya hiccup, kupona moja kwa moja baada ya hali isiyo ya kawaida kuondolewa
	juu ya sasa	110%~200% ya pato lililokadiriwa sasa
	juu ya nguvu	110%~200% ya nguvu ya pato iliyokadiriwa
Kimazingira	Joto la uendeshaji	﹣20～﹢60℃ (Tafadhali rejea “Kupunguza Mviringo”)
	Unyevu wa kazi	20~90%RH, hakuna condensation
	Joto la kuhifadhi na unyevu	﹣40～﹢85℃,10～95%RH
	Inastahimili mtetemo	10～500Hz, 2G 10 dakika/mzunguko, X, Y, Mhimili wa Z kila mmoja 60 dakika
Usalama na Utangamano wa Kiumeme	kanuni za usalama	Refer to CE, CCC, IT general standard design, actually need your company to pass the test according to the certification requirements
	Upinzani wa shinikizo	I/P-O/P:3KVAC
	Upinzani wa insulation	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
	Electromagnetic Compatibility Emissions	Refer to CE, CCC, IT general standard design, actually need your company to pass the test according to the certification requirements
	Electromagnetic Compatibility Immunity	Refer to CE, CCC, IT general standard design, actually need your company to pass the test according to the certification requirements
Mechanical	Size (L*W*H)	130*50*30mm(L*W*H）
	weight	About0.5Kg/PCS
Maoni	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: from 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.