Maelezo

Vipengele：

Mfano Na: TA12

Jina la Bidhaa: China manufacturer 10W 18W 24W Open Frame Power Supply

* Ubunifu wa sura ndogo sana, rahisi kufunga

* Uendeshaji kamili wa mzigo, kupanda kwa joto la chini

* Kukidhi mahitaji ya usalama, and isolation withstand voltage is greater than 1500VAC

* Refer to EMC design, inaweza kuthibitishwa, usindikaji mdogo wa ripple.

* Teknolojia ya hiari ya urekebishaji wa ulandanishi, ufanisi wa juu na kupanda kwa joto la chini.

* Output short-circuit, over-current, over-power protection functions are perfect.

Vigezo/Vigezo vya Umeme
Mfano Na		TA18-5V3A	TA12-12V1.5A	TA18-12V2A	TA18-24V1A
Pato	DC voltage	5V	12V	12V	24V
	Iliyokadiriwa sasa	3A	1.5A	2A	1A
	Masafa ya sasa	0-3A	0-1.5A	0-2A	0-1A
	rated power	10W	18W	24W	24W
	Ripple na Kelele (Upeo wa juu)	50mVp-p	80mVp-p	80mVp-p	100mVp-p
	Usahihi wa voltage	±5%	±3%	±3%	±3%
	Kiwango cha marekebisho ya mstari	±0.5%	±0.5%	±0.5%	±0.5%
	Udhibiti wa Mzigo	±1%	±1%	±1%	±1%
	Ufanisi (TYP)	78%	85%	85%	88%
	Aina ya marekebisho ya voltage	haiwezi kurekebishwa
	Kuanzisha, wakati wa kupanda	1500ms,30ms/220VAC 2500ms,30ms/110VAC(mzigo kamili)
Ingizo	safu ya voltage	VAC90-264V VDC127~370V (Tafadhali rejea “Kupunguza Mviringo”)
	Masafa ya Marudio	47~63Hz
	AC ya sasa (TYP)	0.3A/220VAC ,0.5A/110VAC
	Inrush sasa (TYP)	KUANZA BARIDI 35A
	kuvuja kwa sasa	<2mA/240VAC
Ya sasa Ulinzi	mzunguko mfupi	Hali ya ulinzi: hali ya hiccup, kupona moja kwa moja baada ya hali isiyo ya kawaida kuondolewa
	juu ya sasa	110%~200% ya pato lililokadiriwa sasa
	juu ya nguvu	110%~200% ya nguvu ya pato iliyokadiriwa
Kimazingira	Joto la uendeshaji	﹣20～﹢60℃ (Tafadhali rejea “Kupunguza Mviringo”)
	Unyevu wa kazi	20~90%RH, hakuna condensation
	Joto la kuhifadhi na unyevu	﹣40～﹢85℃,10～95%RH
	Inastahimili mtetemo	10～500Hz, 2G 10 dakika/mzunguko, X, Y, Mhimili wa Z kila mmoja 60 dakika
Usalama na Utangamano wa Kiumeme	kanuni za usalama	Refer to CE, IT general standard design
	Upinzani wa shinikizo	I/P-O/P:1.5KVAC
	Upinzani wa insulation	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
Mechanical	Size (L*W*H)	65*32.5*16mm(L*W*H）
	weight	About 0.3Kg/PCS
Maoni	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: from 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.