Maelezo

Vipengele：

Mfano Na: AN120
Jina la Bidhaa:80W 100W 120W open frame power supply factory
* Ubunifu wa sura ndogo sana, rahisi kufunga
* Uendeshaji kamili wa mzigo, kupanda kwa joto la chini
* Kukidhi mahitaji ya usalama, na kuhimili voltage ya kutengwa ni kubwa kuliko 3000VAC
* Inaendana na muundo wa EMC, inaweza kuthibitishwa, usindikaji mdogo wa ripple.
* Teknolojia ya hiari ya urekebishaji wa ulandanishi, ufanisi wa juu na kupanda kwa joto la chini.
* Pato mzunguko mfupi, juu ya sasa, juu ya ulinzi wa nguvu kazi ni kamilifu.

Vigezo/Vigezo vya Umeme
Mfano Na		AN120-24A	AN120-24B	AN120-24C	AN120-24D
Pato	main DC voltage	24V	24V	24V	24V
	main current range	0-3A	0-3A	0-4A	0-4A
	Secondary DC voltage	5V	12V	5V	12V
	Secondary current range	0-2A	0-1A	0-2A	0-1A
	Nguvu iliyokadiriwa	80W	100W	100W	120W
	Ripple na Kelele (Upeo wa juu)	100mVp-p	100mVp-p	150mVp-p	150mVp-p
	Usahihi wa voltage	±3%	±3%	±3%	±3%
	Kiwango cha marekebisho ya mstari	±0.5%	±0.5%	±0.5%	±0.5%
	Load adjustment rate	±1%	±1%	±1%	±1%
	Ufanisi (TYP)	83%	83%	83%	83%
	Aina ya marekebisho ya voltage	unadjustable
	Kuanzisha, wakati wa kupanda	1500ms,30ms/220VAC 2500ms,30ms/110VAC(mzigo kamili)
Ingizo	safu ya voltage	VAC90-264V VDC127~370V (Tafadhali rejea “Kupunguza Mviringo”)
	Masafa ya Marudio	47~63Hz
	AC ya sasa (TYP)	1.5A/110V 0.8A/220V	2A/110V 1A/220V	2A/110V 1A/220V	2.2A/110V1.1A/220V
	Inrush sasa (TYP)	Cold start COLD START 35A
	kuvuja kwa sasa	<2mA/240VAC
Ya sasa Ulinzi	mzunguko mfupi	Hali ya ulinzi: hali ya hiccup, kupona moja kwa moja baada ya hali isiyo ya kawaida kuondolewa
	juu ya sasa	110%~200% ya pato lililokadiriwa sasa
	juu ya nguvu	110%~200% ya nguvu ya pato iliyokadiriwa
Kimazingira	Joto la uendeshaji	﹣20～﹢60℃ (Tafadhali rejea “Kupunguza Mviringo”)
	Unyevu wa kazi	20~90%RH,hakuna condensation
	Joto la kuhifadhi na unyevu	﹣40～﹢85℃,10～95%RH
	Inastahimili mtetemo	10～500Hz,2G 10 dakika/mzunguko, X, Y, Mhimili wa Z kila mmoja 60 dakika
Usalama na Utangamano wa Kiumeme	kanuni za usalama	Refer to CE, CCC, IT, general standard design for home appliances (customers need to pass the certification test of the whole product)
	Upinzani wa shinikizo	I/P-O/P:3KVAC
	Upinzani wa insulation	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
	Electromagnetic Compatibility Emissions	Refer to CE, CCC, IT, general standard design for home appliances (customers need to pass the certification test of the whole product)
	Electromagnetic Compatibility Immunity	Refer to CE, CCC, IT, general standard design for home appliances (customers need to pass the certification test of the whole product)
Mechanical	Size (L*W*H)	110*60*35mm(L*W*H）
	weight	About 0.5Kg/PCS
Maoni	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: from 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.