Description

Features：

Model No: AN120
Product Name:80W 100W 120W open frame power supply factory
* Ultra small shape design, easy to install
* Full load operation, low temperature rise
* Meet safety requirements, and isolation withstand voltage is greater than 3000VAC
* Compliant with EMC design, can be certified, low ripple processing.
* Optional synchronous rectification technology, higher efficiency and lower temperature rise.
* Output short circuit, over current, over power protection functions are perfect.

Electrical Parameters/Specifications
Model No		AN120-24A	AN120-24B	AN120-24C	AN120-24D
Output	main DC voltage	24V	24V	24V	24V
	main current range	0-3Arte	0-3Arte	0-4Arte	0-4Arte
	Secondary DC voltage	5V	12V	5V	12V
	Secondary current range	0-2Arte	0-1Arte	0-2Arte	0-1Arte
	Rated power	80W	100W	100W	120W
	Ripple and Noise (Maximum)	100mVp-p	100mVp-p	150mVp-p	150mVp-p
	Voltage accuracy	±3%	±3%	±3%	±3%
	Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%
	Load adjustment rate	±1%	±1%	±1%	±1%
	Efficiency (TYP)	83%	83%	83%	83%
	Voltage adjustment range	unadjustable
	Start-up, rise time	1500ms,30ms/220VAC 2500ms,30ms/110VAC(full load）
Input	voltage range	VAC90-264V VDC127~370V (Please refer to “Derating Curve”)
	Frequency Range	47~63Hz
	AC current (TYP)	1.5A/110V 0.8A/220V	2A/110V 1A/220V	2A/110V 1A/220V	2.2A/110V1.1A/220V
	Inrush current (TYP)	Cold start COLD START 35A
	leakage current	<2mA/240VAC
Current Protection	short circuit	Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
	over current	110%~200% of rated output current
	over power	110%~200% of rated output power
Environmental	Operating temperature	﹣20～﹢60℃ (Please refer to “Derating Curve”)
	Working humidity	20~90%RH,no condensation
	Storage temperature and humidity	﹣40～﹢85℃,10～95%RH
	Vibration resistant	10～500Hz,2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Safety and Electromagnetic Compatibility	safety regulations	Refer to CE, CCC, IT, general standard design for home appliances (customers need to pass the certification test of the whole product)
	Pressure resistance	I/P-O/P:3KVAC
	Insulation resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
	Electromagnetic Compatibility Emissions	Refer to CE, CCC, IT, general standard design for home appliances (customers need to pass the certification test of the whole product)
	Electromagnetic Compatibility Immunity	Refer to CE, CCC, IT, general standard design for home appliances (customers need to pass the certification test of the whole product)
Mechanical	Size (L*W*H)	110*60*35mm(L*W*H）
	weight	About 0.5Kg/PCS
Remarks	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: from 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.