Сүрөттөө

Өзгөчөлүктөрү：

Модель №: TA150

Продукт аты: OEM ODM AC DC Open Frame Switching Power Supply Manufacturer

* Ультра кичинекей форма дизайны, орнотуу үчүн жеңил

* Толук жүктөө операциясы, төмөн температуранын жогорулашы

* Коопсуздук талаптарына жооп берүү, жана изоляцияга туруштук берүүчү чыңалуу 1500VACдан жогору.

* Күчтүү каршы кийлигишүү жөндөмдүүлүгү, төмөн толкун иштетүү.

* Кошумча синхрондуу оңдоо технологиясы, жогорку натыйжалуулугун жана төмөнкү температураны жогорулатуу.

* Чыгуу кыска туташуусу, ашыкча ток, ашыкча күч коргоо функциялары кемчиликсиз.

Remarks:

open frame psu

Electrical Parameters/Specifications
Модель №		TA150-24V5A	TA150-24V6A	TA150-36V5A	TA150-48V3A
Output	DC voltage	24В	24В	36В	48В
	Rated current	5A	6A	5A	3A
	Current range	0-6A	0-6A	0-5A	0-4A
	Rated power	120W	150W	150W	150W
	Ripple and Noise (Maximum)	150mVp-p	150mVp-p	200mVp-p	200mVp-p
	Voltage accuracy	±3%	±3%	±3%	±3%
	Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±1%	±1%	±1%	±1%
	Efficiency (TYP)	84%（220V MAX）	84%（220V MAX）	85%（220V MAX）	85%（220V MAX）
	Voltage adjustment range	not adjustable
	Start-up, rise time	1500ms,30ms/220VAC 2500ms,30ms/110VAC(full load）
Input	voltage range	VAC90-264V VDC127~370V (Please refer to “Derating Curve”）
	Frequency Range	47~63Hz
	AC current (TYP)	1.4A/220VAC,2.5A/110V
	Inrush current (TYP)	COLD START 35A
	leakage current	<2mA/240VAC
Current Protection	short circuit	Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
	ашык ток	110%~200% of rated output current
	over power	110%~200% of rated output power
Environmental	Operating temperature	﹣20～﹢60℃ (Please refer to “Derating Curve”)
	Working humidity	20~90%RH, no condensation
	Storage temperature and humidity	﹣40～﹢85℃,10～95%RH
	Vibration resistant	10～500Hz, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Safety and Electromagnetic Compatibility	safety regulations	Refer to CE, CCC, Ал, general standard design of home appliances, (customer certification test is required)
	Pressure resistance	I/P-O/P:1.5KVAC
	Insulation resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
	Electromagnetic Compatibility Emissions	Refer to the general standard design of industrial safety regulations, (requires customer safety testing of the whole machine)
	Electromagnetic Compatibility Immunity	Refer to the general standard design of industrial safety regulations, (requires customer safety testing of the whole machine)
Mechanical	Size (L*W*H)	115*67*35mm(L*W*H)
	weight	About 0.7Kg/PCS
Remarks	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: from 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.