Сүрөттөө

Өзгөчөлүктөрү：

Модель №: AN120
Продукт аты:80W 100W 120W open frame power supply factory
* Ультра кичинекей форма дизайны, орнотуу үчүн жеңил
* Толук жүктөө операциясы, төмөн температуранын жогорулашы
* Коопсуздук талаптарына жооп берүү, жана изоляцияга туруштук берүүчү чыңалуу 3000VACдан жогору
* EMC дизайны менен шайкеш келет, тастыкталышы мүмкүн, төмөн толкун иштетүү.
* Кошумча синхрондуу оңдоо технологиясы, жогорку натыйжалуулугун жана төмөнкү температураны жогорулатуу.
* Чыгуу кыска туташуусу, ашык ток, ашык кубат коргоо функциялары кемчиликсиз.

Electrical Parameters/Specifications
Модель №		AN120-24A	AN120-24B	AN120-24C	AN120-24D
Output	main DC voltage	24В	24В	24В	24В
	main current range	0-3A	0-3A	0-4A	0-4A
	Secondary DC voltage	5В	12В	5В	12В
	Secondary current range	0-2A	0-1A	0-2A	0-1A
	Rated power	80W	100W	100W	120W
	Ripple and Noise (Maximum)	100mVp-p	100mVp-p	150mVp-p	150mVp-p
	Voltage accuracy	±3%	±3%	±3%	±3%
	Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%
	Load adjustment rate	±1%	±1%	±1%	±1%
	Efficiency (TYP)	83%	83%	83%	83%
	Voltage adjustment range	unadjustable
	Start-up, rise time	1500ms,30ms/220VAC 2500ms,30ms/110VAC(full load）
Input	voltage range	VAC90-264V VDC127~370V (Please refer to “Derating Curve”)
	Frequency Range	47~63Hz
	AC current (TYP)	1.5A/110V 0.8A/220V	2A/110V 1A/220V	2A/110V 1A/220V	2.2A/110V1.1A/220V
	Inrush current (TYP)	Cold start COLD START 35A
	leakage current	<2mA/240VAC
Current Protection	short circuit	Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
	ашык ток	110%~200% of rated output current
	over power	110%~200% of rated output power
Environmental	Operating temperature	﹣20～﹢60℃ (Please refer to “Derating Curve”)
	Working humidity	20~90%RH,no condensation
	Storage temperature and humidity	﹣40～﹢85℃,10～95%RH
	Vibration resistant	10～500Hz,2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Safety and Electromagnetic Compatibility	safety regulations	Refer to CE, CCC, Ал, general standard design for home appliances (customers need to pass the certification test of the whole product)
	Pressure resistance	I/P-O/P:3KVAC
	Insulation resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
	Electromagnetic Compatibility Emissions	Refer to CE, CCC, Ал, general standard design for home appliances (customers need to pass the certification test of the whole product)
	Electromagnetic Compatibility Immunity	Refer to CE, CCC, Ал, general standard design for home appliances (customers need to pass the certification test of the whole product)
Mechanical	Size (L*W*H)	110*60*35mm(L*W*H）
	weight	About 0.5Kg/PCS
Remarks	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: from 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.