опис

особливості：

Номер моделі: TA18

Назва продукту: Factory OEM ODM 15W 18W 24W open frame Series

* Ультрамаленький дизайн, простий в установці

* Робота з повним навантаженням, низьке підвищення температури

* Відповідати вимогам безпеки, і напруга ізоляції перевищує 1500 В змінного струму

* Refer to EMC design, можна сертифікувати, низька пульсація обробки.

* Додаткова технологія синхронного випрямлення, більш висока ефективність і менший перепад температури.

* Коротке замикання на виході, перевищення струму, функції захисту від перенапруги ідеальні.

Electrical Parameters/Specifications
Номер моделі		TA18-5V3A	TA12-12V1.5A	TA18-12V2A	TA18-24V1A
Output	DC voltage	5V	12V	12V	24V
	Rated current	3А	1.5А	2А	1А
	Current range	0-3А	0-1.5А	0-2А	0-1А
	rated power	15W	18W	24W	24W
	Ripple and Noise (Maximum)	50mVp-p	80mVp-p	80mVp-p	100mVp-p
	Voltage accuracy	±5%	±3%	±3%	±3%
	Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±1%	±1%	±1%	±1%
	Ефективність (TYP)	78%	85%	85%	88%
	Voltage adjustment range	not adjustable
	Start-up, rise time	1500ms,30ms/220VAC 2500ms,30ms/110VAC(full load）
Input	voltage range	VAC90-264V VDC127~370V (Please refer to “Derating Curve”)
	Frequency Range	47~63Hz
	AC current (TYP)	0.3A/220VAC ,0.5A/110VAC
	Inrush current (TYP)	COLD START 35A
	leakage current	<2mA/240VAC
Current Protection	short circuit	Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
	над струмом	110%~200% of rated output current
	over power	110%~200% of rated output power
Environmental	Operating temperature	﹣20～﹢60℃ (Please refer to “Derating Curve”)
	Working humidity	20~90%RH, no condensation
	Storage temperature and humidity	﹣40～﹢85℃,10～95%RH
	Vibration resistant	10～500Hz, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Safety and Electromagnetic Compatibility	safety regulations	Refer to CE, IT general standard design
	Pressure resistance	I/P-O/P:1.5KVAC
	Insulation resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
Mechanical	Size (L*W*H)	65*32.5*16mm(L*W*H）
	weight	About0.3Kg/PCS
Remarks	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: від 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.