Description
特徴：
モデル番号: MA200
製品名: オープンフレーム電源 manufacturer
* ウルトラスモールシェイプデザイン, 簡単にインストールできます
* 全負荷操作, 低温上昇
* 安全要件を満たします, また、電圧に耐える分離は1500VACを超えています
* 経済的で実用的, 安定した品質, 低リップル処理.
* オプションの同期修正技術, より高い効率と低温上昇.
* 出力短絡, 過電流, オーバーパワー保護機能は完璧です.
| Electrical Parameters/Specifications | |||||
| モデル番号 | MA200-24V8A | MA200-24V10A | MA200-36V8A | MA200-48V5A | |
| Output | DC voltage | 24V | 24V | 36V | 48V |
| Rated current | 8A | 10A | 8A | 5A | |
| Current range | 0-12A | 0-15A | 0-10A | 0-7A | |
| rated power | 200W | 240W | 300W | 240W | |
| Ripple and Noise (Maximum) | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | |
| Voltage accuracy | ±3% | ±3% | ±3% | ±3% | |
| Linear adjustment rate | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Load Regulation | ±1% | ±1% | ±1% | ±1% | |
| Efficiency (TYP) | 87% | 87% | 88% | 89% | |
| Cooling method | Free cooling | Fan cooling (10CFM) | Fan cooling (10CFM) | Fan cooling (10CFM) | |
| Start-up, rise time | 1500ms,30ms/220VAC 2500ms,30ms/110VAC (full load） | ||||
| Input | voltage range | VAC100-240V (Please refer to “Derating Curve”) | |||
| Frequency Range | 50Hz/60Hz | ||||
| AC current (TYP) | 220V1.8A/110V3A | 220V2.2A/110V3A | 220V2.7A/110V3A | 220V2.2A/110V3A | |
| Inrush current (TYP) | COLD START 35A | ||||
| leakage current | <2mA/240VAC | ||||
| Current Protection |
short circuit | Protection mode: hiccup mode, automatic recovery after abnormal condition is removed | |||
| 現在の上 | 110%~200% of rated output current | ||||
| over power | 110%~200% of rated output power | ||||
| Environmental | Operating temperature | ﹣20～﹢60℃ (Please refer to “Derating Curve”) | |||
| Working humidity | 20~90%RH, no condensation | ||||
| Storage temperature and humidity | ﹣40～﹢85℃,10～95%RH | ||||
| Vibration resistant | 10～500Hz, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes | ||||
| security | Pressure resistance | I/P-O/P:1.5KVAC | |||
| sInsulation resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH | ||||
| Mechanical | Size (L*W*H) | 125*66*35mm(L*W*H) (35MM is the height of board components) | |||
| weight | About 0.8Kg/PCS | ||||
| Remarks | 1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature. | ||||
| 2.Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth. | |||||
| 3.Accuracy: including setting error, linear adjustment rate and load adjustment rate. | |||||
| 4.Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test. | |||||
| 5.Load regulation measurement method: from 0% to 100% rated load. | |||||
| 6.The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment. | |||||
Reviews
There are no reviews yet.