Kev piav txog

Features：

Model No: TA12

Product Name: China manufacturer 10W 18W 24W Open Frame Power Supply

* Ultra small shape design, easy to install

* Full load operation, low temperature rise

* Meet safety requirements, and isolation withstand voltage is greater than 1500VAC

* Refer to EMC design, can be certified, low ripple processing.

* Optional synchronous rectification technology, higher efficiency and lower temperature rise.

* Output short-circuit, dhau tam sim no, over-power protection functions are perfect.

Electrical Parameters/Specifications
Model No		TA18-5V3A	TA12-12V1.5A	TA18-12V2A	TA18-24V1A
Output	DC voltage	5V	12V	12V	24V
	Rated current	3A	1.5A	2A	1A
	Current range	0-3A	0-1.5A	0-2A	0-1A
	rated power	10W	18W	24W	24W
	Ripple and Noise (Maximum)	50mVp-p	80mVp-p	80mVp-p	100mVp-p
	Voltage accuracy	±5%	±3%	±3%	±3%
	Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±1%	±1%	±1%	±1%
	Kev ua tau zoo (TYP)	78%	85%	85%	88%
	Voltage adjustment range	not adjustable
	Start-up, sawv lub sij hawm	1500ms,30ms / 220VAC 2500ms,30ms / 110VAC(tag nrho load)
Tswv yim	voltage range	VAC90-264V VDC127~370V (Thov xa mus rau “Derating Curve”)
	Ntau zaus	47~63Hz
	AC tam sim no (TYP)	0.3A / 220VAC ,0.5A/110VAC
	Inrush tam sim no (TYP)	COLD START 35A
	leakage tam sim no	<2mA / 240VAC
Tam sim no Kev tiv thaiv	luv luv	Kev tiv thaiv hom: hiccup kev, tsis siv neeg rov qab los tom qab qhov xwm txheej tsis zoo raug tshem tawm
	over current	110%~ 200% ntawm cov zis tam sim no
	tshaj zog	110%~ 200% ntawm cov zis tso zis muaj zog
Ib puag ncig	Ua haujlwm kub	﹣20～﹢60℃ (Thov xa mus rau “Derating Curve”)
	Ua haujlwm av noo	20~ 90% RH, tsis muaj condensation
	Cia kub thiab av noo	40 ~ 85 ℃,10～ 95% RH
	Kev vibration resistant	10～ 500 Hz, 2G 10 feeb/cycle, X, Y, Z axis txhua 60 feeb
Kev nyab xeeb thiab Electromagnetic Compatibility	kev ruaj ntseg	Xa mus rau CE, IT general standard design
	Siab tsis kam	I/P-O/P:1.5KVAC
	Insulation resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
Mechanical	Size (L*W*H)	65*32.5*16mm(L*W*H）
	weight	About 0.3Kg/PCS
Remarks	1. Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.
	2. Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.
	3. Accuracy: including setting error, linear adjustment rate and load adjustment rate.
	4. Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.
	5. Load regulation measurement method: from 0% to 100% rated load.
	6. The power supply should be regarded as a part of the components in the system, thiab qhov cuam tshuam kev lees paub ntawm electromagnetic compatibility yuav tsum tau ua nrog rau cov khoom siv davhlau ya nyob twg.